|
Finishing
|
|
|
My very limitid flying experiences tell me that good defrost fans are a
must during spring, automn and winter. So before attaching the
windshield I wanted to install the fans |
 |
 |
Here I laid out the position ... |
|
... and then cut it with a dremel. |
 |
 |
Attachment holes drilled and dimpled. |
|
Now installed. |
 |
 |
Here a look from the other side. |
|
I wanted to have lighted switches in the cockpit.I bought all lighted 12
Volt swiches capable of at least 20A from the biggest German electronics
distributor (Conrad) and checked them out. Unlighted and ... |
 |
 |
... lighted. Either they were too bright or too dark, or had a inferior
feelin. I decided on the one in the middle, capable of 30A and one of
the more expensive but still very reasonable (around $6) |
|
If you thought that building an airplane was like glueing together some
cardboard then you were right! Here is what I intend to do on the center
console. |
 |
 |
Here is where I spend the evening making airplane noises. |
|
| Hobbes Meter: |
|
Instrument Panel
6.75 h
|
|
